Installing a TMF Back into Icarus (RD13)

Franco Nogarin's picture


The main standoffs are setup for KK/MK style 45 mm - 45 degree mounting, and RD33 was using an OpenPilot CC3D last so it has been adapted down to 30.5 mm and 0 degree offset . I tried putting an AGL Hobbies aka Rusty universal 45mm-30.5 adapter, but that seems like a waste of adapters.

 so I started over with only the universal adapter and went from 45mm 45 degree to 45mm 0 degree.

Hooked it all up and took it for a test flight, Woot, Icarus is back in the skies!

Article Type: 
Model Build Log
Article Model Link: