RD44 Design and Build

Franco Nogarin's picture

The initial design started with a simple hexagon that would allow the inclusion of all the holes

 

Next I had to map out where the holes would go, keeping in mind that this was a universal plate design for both upper and lower deck.

After more testing and chcking I went ahead to put the pattern onto wood and cut the first test plate

Next the drilling holes need to be marked

and then drilled out.

and the main hole

Now a test fit

Now test assembly

Now a real assembly

Thats as far as I got on this day!!!

 

Article Type: 
Model Build Log
Article Model Link: